Bathroom Home :
The sliding closet door with the track is screwed in the exact position of a perfect fit. The floor track is placed loosely on top, the first sliding closet door is hung in the ceiling track. When the sliding closet door is secured it’s lit first to the right and lined up plumb with the wall. The position for the floor track is marked the same procedure is followed. On the left side checking the plumb line of the left door. The position of the floor track can now be determined and the entire length marked.
If the floor track is to be installed on a carpeted floor, a carpet strip will be cut out to accommodate the track. The floor cut ring is not disturbed if the track is installed on the surface. Before the floor track is installed in its final position, it’s checked and cleaned one more time. Then fitted and secured with carpet tape.
The sliding closet doors are again hung out to make room for the floor track. Insert it’s pressed into place and everything is now complete. The rollers are inserted the sliding closet doors are now hung and adjusted. So that they’re plumbed with the wall. The work is almost completed only a few fine adjustments remain then the height adjustment of the rollers. After the fine-tuning adjustment, the doors glide gently and noiselessly.
The final details the sealing brushes and hole punch covers are put in place. The location of the position holders is established, the interior system with three sliding closet doors is fully installed. One last test everything operates perfectly time for the handover. Just on time, the last speck of dust is cleaned off.