Came up found and replace the bracket. The process of installing this new bracket in place, first thing need to do is make sure that this bracket is flush again. So we need to hammer it back in place. The next thing on this particular door is this door has digital struts on each of the panels, so for an order to be able to put a replacement barber on the door panel we have to remove the additional spot. Determine the height under your door panel with the bracket and adjust accordingly. Then take the included bolts and attach the bracket to the required height. Before installing it the next thing to do is to loosen the bolts where the sprocket is going to go. Then just put the bolts back in place loosely until it tightens them down. Be sure to have to take the bolts down too tight. Remove this bracket on the pin and then attach the arm, see the opener and be sure to secure it. Also, make sure the bolts that you use to put two pieces of bracket together or tight. Once everything is tightened down, go ahead and try opening the door.